5 barrels to get your AR on target!

When dealing with the upgrading of your AR15’s barrel it opens a whole new can of worms. What purpose do you want your AR to serve? Is it just a weekend plinker? Are you trying for distance? Maybe you want to make it shorter (NFA Rules apply of course) There are many reasons to swap out your barrel. Maybe yours has had better days and its time to replace it. Either way there are several options and companies available to you to choose from!

Ballistic Advantage 18″ .223 Wylde SPR Fluted Stainless Steel Rifle Length AR 15 Barrel, Premium Series

This .223 Wylde chambered 18 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Their Premium Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension.

This barrel features some of the most aggressive and weight reducing flutes on the market. Coming in at a total weight of 28 oz. They’ve managed to cut almost a pound out of the barrel while not sacrificing one ounce of accuracy!

Details

Length 18″
Material 416R Stainless Steel
Profile SPR
Finish Bead Blasted
Gas System Length Rifle
Gas Block Journal .750″
Twist Rate 1:8 inches
Muzzle 1/2×28 Threaded
Weight 28oz
Other Info HP and MPI Tested

16″ Carbine Length Evo Ultra Lite VooDoo Barrel

 

  • 16″ Barrel
  • .625″ Shoulder
  • 1:7 Twist
  • M4 Profile 4150 CM Melonited (inside and out)
  • Chambered .223/5.56 x 45 mm NATO
  • Weight: 1.454 lbs

F-1 FIREARMS 16″ .223 WYLDE 416SS BARREL

 

F-1 uses their own state of the art barrel cell to provide high end buttoned 416RSS Blanks. They QA/QC throughout the entire barrel making process, air-guaging and drift guaging using 10″ drift pins testing to a tenth of a thousandth on tolerance. These barrels are sub MOA and are match grade.

F-1 Firearms Fluted 416R SS barrels

  • 416 twice stress relieved steel
  • 5R rifling – button pulled
  • Only available in 16″ at this time

BCM Standard 16″ Mid Length (ENHANCED LIGHT WEIGHT – FLUTED) Barrel, Stripped (.625)

BCM Exclusive Design

Continuous taper designed for optimal weight, balance, and performance on a semi-automatic carbine.

Heavier profile toward the rear near chamber area.

Thinner tapered profile out front.

No sharp handguard cap shoulder for improved barrel harmonics.

Please note for gas block selection, barrel journal measures .625″
Approximate Weight: 1lb 6oz.
Fluted version is approximately .5 oz lighter

Professional Grade Weaponry, by BCM®
Made by Bravo Company MFG, Inc. (BCM™) These Barreled Upper Receiver Groups are designed for shooting professionals with the Mil-Spec features for the demands of their duty.
These are stripped 16″ Mid Length Standard 11595E barrels with gas ports installed and dimpled for a strong gas block installation. M4 Feed Ramp Barrel Extension

16″ M4 Contour 5.56 NATO barrel with 1:8 twist by Anderson Manufacturing

This is a great barrel for a great cost. Jump on this deal before it’s gone! A quality barrel priced to meet any builder’s budget! Starting with ordnance grade 4140 Chromoly steel, this barrel is precision cut to M4 contour, reducing weight where it matters for a balanced build. Chambered for 5.56 NATO and fully capable of running .223 Remington, this barrel features a 1:8 twist rate, ideal for a wide variety of projectiles from 45 grains up to 77!

Details

  • BARREL LENGTH: 16″
  • CALIBER: 5.56 NATO
  • TWIST RATE: 1:8
  • PROFILE/CONTOUR: M4
  • MATERIAL: 4150 Chrome Moly Vanadium
  • FINISH: Parkerized
  • GAS SYS: Carbine
  • DIAMETER AT GAS PORT: .750″
  • MUZZLE THREAD: 1/2-28
  • TREATMENT: Non RF85
  • ADDITIONAL SPECS/NOTES: Barrel is compatible with .223 Ammunition
js.cloudflare.com/ajax/libs/jquery/3.1.1/jquery.min.js">